Technical information

High intensity discharge ceramic metal halide
Watt ratings 35, 70, 100, 150, 210, 315 W
Colour temperature 3000° alt. 4200° Kelvin
Colour reproduction 88 Ra and 96 Ra respectively
Luminous efficience 92-106 lumen/watt for 35-150W
Luminous efficience 115-120 lumen/watt for 210-315W
Light reaches full intensity a couple of minutes after being switched on
Socket G12. For 210W and 315W socket PGZ18
Exchange of lamp is carried out through the service opening
Osram and Philips offer a 2 years guarantee when fitted with a control gear described below.
Lamp life: Average life span is 15,000 hours for the powers 35-150W, 22,000-30,000 h for 210W and 315W.
The Solljus' lamps deliver on average
25 % more light per Watt than ordinary metal halide lamps
120% more than mercury lamps
15% more than tubes T5
15% more than tubes T8
40% more than tubes T12
(Source: www.osram.se).

Provides flicker-free light
Prolongs the life span of the lamp
Does not disturb mains supply, or radio and TV transmissions etc.
Osram and Philips offer a 5 and 8 years resp. guarantee when fitted with a lamp described above.

 
Conventional ballast

Durable ballast with a long life span.
Does not disturb mains supply, or radio and TV transmissions etc.
Does not provide flicker-free light
Does not prolong the life span of the lamp.
Osram and Philips offer a 2 year guarantee irrespective of type of lamp used.

Lenses of tempered glass for ceiling height 3m and above spread light evenly over lit surfaces. Glare is reduced as the light from the lamp is distributed over the entire lens. Due to the lens being glued to the reflector, both the reflector and the lamp are protected from dust and dirt.

The housing is press cast in aluminium with extra large cooling flanges to allow the lamp to cool leading to prolonged lamp life.
The house is equipped with a respiratory filter to prevent condensation forming on the reflector and the lens.

Installation clamps for wire cables. Attachment for ceiling, walls and pillars.

Equipped with a 2m lead and mains plug. Both sides of the attachment

have 2 holes spaced 70mm apart for the mounting of a junction box.